Rumsey continues to monitor CDC guidelines and recommendations for COVID-19, and will be holding in-person training classes when possible based on current local guidelines. If you have questions, please contact your Rumsey Sales Rep.
Responding to business needs has never been more challenging. We are in a dynamically changing situation where travel to a site for troubleshooting and maintenance tasks might not be feasible or economical.
By leveraging secure remote access, you can resolve troubleshooting and maintenance tasks remotely whether you’re too far to travel or just plain can’t.
In this session we will cover:
We will also discuss what is and is not accessible while you are remotely connected and how you can vary the level of accessible nodes on a machine network. Finally, we will show you that with the right hardware, remote access is just the start – we will show you how to gain valuable insight into machine performance through KPIs and stay aware of what is going on with the machine so you’re not responding to a problem but getting aware of an issue before it compromises your machine.
Taught by: Dave Kang, Industrial Networking & Security Specialist at Rumsey Electric. Dave has spent the last 15+ years working in multiple aspects of Information Technology. His experience lies primarily in infrastructure design and management – both physical and virtual – working closely with vendors such as Cisco, VMware, EMC, Microsoft Azure, and Check Point. Dave is a Cisco Certified Industrial Networking Specialist and focused on helping to bridge the gap between IT and OT networks; he operates as a liaison between the disparate networks in pursuit of the ‘Connected Enterprise’.