Upcoming Events

April 20, 2021

CCP146- Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 4-20

The course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology, and you will be exposed to Logix5000 system hardware, including hands-on experience with the ControlLogix platform.
April 1, 2021
Logix Controllers

Modbus TCP Communication with Logix Controllers

Logix controllers don't natively support Modbus TCP but we have a simple way of doing Modbus TCP communication in a Logix controller without additional hardware.
February 4, 2021

Retrofitting Legacy Machines for Industry 4.0

Legacy machines have their place and run most facilities today. They don’t, however, have the necessary tools and technologies in place to make them more efficient or offer cost-savings. Retrofitting machines for Industry 4.0 can bring together communication, collection and collaboration to make your machines more efficient and effective.
September 15, 2020
Rumsey webinar Sept 15

Demystifying CLX Redundancy – What You Need to Know for Success- 9/15-Webinar

In this session we will cover how easy it is to create a ControlLogix High Availability Control System. Specifically, we'll cover redundancy design, including revisions of firmware and hardware, along with the basic steps to deploy it.
August 21, 2020

Top 15 Advantages of 5094 Flex I/O

The 5094 Flex I/O platform from Rockwell Automation represents the newest and most robust distributed I/O platform available.
August 11, 2020
Rumsey webinar August 11

PLCs – What Software Version Should I be Using? 8/11 WEBINAR

This session will cover an introduction to the new Rockwell Automation software and firmware lifecycle strategy. We will also cover what the different lifecycle stages mean, our recommended versions to try to stick to, and why based on controllers, functionality and Windows support.
June 11, 2020

Introduction to Intelligent Packaged Power 6/11- WEBINAR

With the expanding use of intelligent devices, it is easier to have access to real-time information on the equipment and operating conditions in your substation. Learn how we approach the integration of electrical devices into the Logix architecture to enable a single integrated power (or electrical) and automation control system.
May 14, 2020

The Premier Integration Experience 5-14 WEBINAR

This session will show you how you can be more efficient when it comes to configuring your drives in a Logix environment—we call this Premier Integration. Not only will you see how this experience helps you reduce integration and configuration times, but you’ll see how you can be more productive from the plant floor and drive information throughout your enterprise.
April 30, 2020

FactoryTalk Activations & RSLogix 5000 Compatibility

Rockwell has made enhancements to the latest version of the FactoryTalk Activation and a change to the activation method used by the latest versions of software.