Upcoming Events

August 11, 2020
Rumsey webinar August 11

PLCs – What Software Version Should I be Using? 8/11 WEBINAR

This session will cover an introduction to the new Rockwell Automation software and firmware lifecycle strategy. We will also cover what the different lifecycle stages mean, our recommended versions to try to stick to, and why based on controllers, functionality and Windows support.
May 21, 2020

Locked-in Series: What’s New in Studio 5000 V33? 5/21 WEBINAR

Review the top 10 new features of Version 33 of Logix Designer so you can decide if it is time to migrate. Topics include the new software features as well as any new hardware support that has been added.
May 7, 2020

Locked-in Series: Monthly Tech Talk 5/7 WEBINAR

In this session Rumsey specialists will cover what’s new and exciting from the past month in the world of automation. The team will also cover any End of Life Announcements and what you need to know about timing.
April 7, 2020

Locked-in Series: Product Lifecycle Info You Need to Know for Your Plant’s PLCs 4/7 WEBINAR

Enter a higher level of production with a controller that fits the needs of today's tasks and many years to come. Start small if needed, then easily expand with a scalable platform. Rumsey will cover the current lifecycle state of your existing controllers and help you chose a new controller for the future to ensure the maximum profitability.
January 14, 2020

Automation Fair Round-up for Machine Builders

There was an explosion of technology in the Automation Space for OEMs/Machine Builders at Automation Fair 2019, let's check out some of the highlights!
October 5, 2018

Connecting to Serial Ports & Legacy Devices

As technology evolves, so do the physical connections to hardware. Newer computers and laptops no longer support the standard 9-pin serial connection port that was used […]
September 26, 2018

Decrease Downtime with Automatic Device Configuration

We’ve all been there – a drive fails, and production suddenly comes to a stop. Every minute the line is down can costs thousands. Did you know that […]
September 10, 2018

What you Need to Know – Converting MicroLogix to Micro800

Migrating a MicroLogix MicroLogix controllers have been around since the mid-1990s and are still one of the most used micro PLCs around the world. However, as […]
August 16, 2018

Test Driving Part 1 with CompactLogix and PanelView Plus

This instructor-led class is designed for new users with little to no programming experience with RSLogix 5000/Studio 5000 or FactoryTalk View Studio. Attendees will be walked […]