Upcoming Events

April 30, 2020

Locked-in Series: VFD-Line Side Protection 4/30 WEBINAR

In this session we will drill down into the varied industry protection types used to dampen line side impacts on VFDs from current and voltage spikes, line distortions and EMI (noise). We'll explain source impedance impacts and all the various upsteam harmonic filtering options.
April 28, 2020

Locked-in Series: What Do I Need to Know for a Successful MicroLogix Migration? 4/28 WEBINAR

As many MicroLogix controllers reach end-of-life, understand the considerations for planning a migration for your MicroLogix PLC. What are the replacements and what are the best practices to approach a migration?
April 23, 2020

Locked-in Series: State Machine and Motion Control – Why it’s a MUST! 4/23 WEBINAR

Stop chasing bits and adopt state machine programming. Learn tips to keep your code in order, make it simpler to document, and how this option is the primary way to program motion successfully. This session will also cover some common information about what the instruction bits for motion actually mean and when to use them.
April 21, 2020

Locked-in Series: What Can Smart Control, Sensor, or Safety Products Do for My Plant? 4/21 WEBINAR

In this overview of the Rockwell Smart Device lines (Sensors / Safety / Motor Control) learn how they integrate, and what kind of information becomes visible with this technology.
April 16, 2020

Locked-in Series: Common Dimensional and Fitment Issues in Replacement of Motors 4/16 WEBINAR

Get a glimpse of the most commonly overlooked information and what to look for when it’s time to replace a motor. We’ll review what the information a nameplate does/doesn’t tell you and how pictures help fill in the blanks. We'll also cover examples of applications to demonstrate how dimensional differences and application constraints are met.
April 14, 2020

Locked-in Series: Installation Considerations for Modern VFDs 4/14 WEBINAR

In this session we will look at the considerations that need to be accounted for in drive installations. Review best practices from the power distribution to drive and then to the motor to help you design, install and maintain your drive products correctly.
April 9, 2020

Locked-in Series: Correcting Harmonic Distortion with Active Harmonic Filters to meet IEEE-519 Requirements 4/9 WEBINAR

Assess the benefits of active harmonic filters and how they can eliminate harmonic distortion so that your facility can meet IEEE-519 requirements and solve other harmonic issues.
April 7, 2020

Locked-in Series: Product Lifecycle Info You Need to Know for Your Plant’s PLCs 4/7 WEBINAR

Enter a higher level of production with a controller that fits the needs of today's tasks and many years to come. Start small if needed, then easily expand with a scalable platform. Rumsey will cover the current lifecycle state of your existing controllers and help you chose a new controller for the future to ensure the maximum profitability.
April 2, 2020

Locked-In Series: Can’t Travel? Options for Implementing Easy, Simple, & Secure Remote Access 4/2 WEBINAR

Traveling to a site to perform troubleshooting and maintenance tasks is not economical and in some cases not be feasible. In this session we will cover a number of possibilities for how you can bring secure remote access to your machine - whether you are building it or it’s already in the field.